Motorcycle Airbag
Suits & Vests
Yes, NFmoto builds custom race suits for airbags, in two ways. We’re an approved manufacturer for the Helite Race Suit Airbag, so your suit can be made with the airbag built in. Or, if you already own an airbag vest made to be worn under a suit, such as Alpinestars Tech-Air, we cut your suit with the room it needs to inflate. Either way, the airbag is planned when you’re measured, not squeezed in afterwards.
Quick Answer
Can a Tech-Air or D-air Airbag Go in a Custom Race Suit?
- Alpinestars Tech-Air: yes. Tech-Air vests are worn under the suit, and we build in the extra room. For the Tech-Air 5, Alpinestars specifies about 4 cm of free space around the chest.
- Dainese D-air: it depends on the model. D-air Racing is sewn into Dainese’s own leathers, so it can’t move into another suit. A D-air vest made to be worn under clothing works: it needs about 5 cm of free circumference, which we build in.
- Helite: built in. Your NFmoto suit is made with the airbag socket, anchor points and back hump to Helite’s specification.
Two Ways to Get There
Two Ways to Get a Motorcycle Airbag Suit
A motorcycle airbag suit can mean two different things, and it's worth being clear on which one you actually want.
NFmoto is an official approved manufacturer for the Helite Race Suit Airbag system (ref. E01). Your suit is patterned from the start with the socket shape, Velcro anchor points and speed hump size that Helite specifies, so the bladder deploys with full coverage and the crash sensor sits in the hump as intended. The system detects a fall and inflates in under 100 ms, protecting your spine, collarbones and chest, and it’s active above 20 km/h so it doesn’t fire when you’re walking around the paddock. We build the socket into your suit at no extra charge. The airbag system itself is bought separately from Helite or an authorised dealer.
If you already own an electronic vest made to go under a suit, keep it. We add the clearance it needs, and can use removable back and chest protectors and extra stretch panels to give it room to inflate. Wear the vest when you take your measurements and tell us its brand and model, so your FitFirst try-on suit is cut around it too.
Side by Side
Built In or Worn Underneath: How They Compare
| Built in (Helite) | Worn underneath (your vest) | |
|---|---|---|
| What you buy | The NFmoto suit, plus the Helite system bought separately | The NFmoto suit; you keep the vest you own |
| Where the airbag sits | Inside the suit, in a socket made to Helite’s specification | In a separate vest under the suit |
| Extra room needed | None: the space is part of the pattern | Usually 4–5 cm around the chest, depending on the vest |
| Use with other kit | Protects you in this suit only | Moves between suits and jackets |
| After a deployment | Fit a new Helite GG 60 cartridge and ride again | Follow the vest maker’s recharge or service process |
| Best for | Riders with one dedicated race suit | Riders who already own a vest, or ride in more than one suit or jacket |
Compatibility
Which Airbag Systems Work With an NFmoto Suit
| System | Works with an NFmoto suit? | How |
|---|---|---|
| Helite Race Suit Airbag (E01) | Yes | Built in, to Helite’s specification |
| Alpinestars Tech-Air Race, Race System-E, Racing V2 | Yes | Worn underneath; suit cut around it |
| Alpinestars Tech-Air 5 and 5 Plasma | Yes | Worn underneath; about 4 cm extra chest room |
| Hit-Air RS-1 | Yes | Worn underneath |
| In&motion vests (Ixon IX-U05, Klim Ai-1, Furygan) | Yes | Worn underneath |
| Dainese D-air vests worn under clothing | Yes | Worn underneath; about 5 cm free circumference |
| Dainese D-air Racing | No | Sewn into Dainese’s own suits |
| Over-suit vests (Spidi Air DPS, Helite GP Air and e-GP Air, Hit-Air VHR, MLV, MLV2 and ST) | No | Made to be worn over a suit, not under it |
Models change, so tell us your exact system when you enquire, and we’ll confirm it fits before anything is cut.
Ordering
How Ordering a Suit With an Airbag Works
- Choose your option in your design brief: built-in Helite, room for your own vest, or no airbag.
- Measure with the vest on if you’re keeping your own, and give us its brand and model. For Helite, your measurements also set the airbag size (S/M or L/XL).
- Try the fit in your FitFirst textile try-on suit, wearing your vest if you have one, and tell us what needs changing.
- We make your suit with the airbag space built into the pattern. Leather production takes about 8–10 weeks after the fitting.
- Fit the airbag. For Helite, the crash sensor goes in the hump and the bladder in its socket, following Helite’s instructions. A vest is simply worn underneath.
After a Crash
Servicing and Repairs
Airbag units are made, certified and serviced by their manufacturers, not by NFmoto. After a Helite deployment, deflate the bladder and fit a new single-use GG 60 cartridge from Helite or an authorised dealer; the sensor and bladder are designed to be used again. For a vest, follow its maker’s inspection, recharge or service process (see servicing, recharging and replacing airbag units). Whatever you wear, have the airbag checked before your next session. If the leathers took damage, see our crash repair service.
FAQ
Common Questions
Can a Tech-Air or D-air airbag be fitted to a custom race suit?
Do you make custom race suits with an airbag built in?
Is the airbag included in the price of the suit?
How much extra room does an airbag vest need?
Can I add an airbag to a race suit I already own?
Should I choose a built-in airbag or a vest?
Want the Full Technical Detail?
Read More
Planning a Suit With an Airbag?
Tell us which system you have, or want, and we’ll build your suit around it.